Rotary Rescue Saw Kit

Field Saw Kit Includes:

  • MULTI-CUT H Series Rotary Rescue Saw with Black Diamond Blade
  • Water Kit
  • 14"(355.6mm) or 12"(305mm) Spare Black Diamond Blade
  • 1.25 Gallon (4.75 l) Fuel Container
  • 8 oz. (.241 l) 2-Cycle Synthetic Oil Mix
  • Spark Plug (Spare)
  • 3/4" (76mm) x 75' (22.86 m) MYTI-FLO Woven Water Hose
  • Drive Belt (Spare)
  • Air Filter (Spare)
  • K&N Filter Recharger Kit
  • Scrench Tool
  • Diamond Plate Aluminum Case with Compartmentalization and Engineered “Hold-Downs”

MULTI-CUT Sawing Kit

Diamond Plate Aluminum Field Case
Operation, Maintenance Manuals
Warranty
(1) MULTI-CUT Fire Rescue Saw with BULLET® Chain
Tool Kit – Including:

  • Grease Gun Grease Packet
  • (1) Air Filter
  • (1) Pre-wrap Filter
  • (1) Foam Filter Dressing
  • (1) 8 oz. 2-Cycle Oil (100:1)
  • Saw Sling – Carry Strap

(1) 1/4 Gallon Fuel Container
(1) BULLET Chain (Spare)
(2) Tree Cutting Chains
(3) Bar & Chain Oil

Specifications subject to change without notice

Click here to see the brochure for the MULTI-CUT saw and BULLET® Chain. For manuals and illustrated parts lists, visit the support section.

Setting the Guard/Depth Gauge

In its fully extended position, the Guard/Depth Gauge completely covers the cutting chain, protecting the operator from accidental contact with the chain.

The Guard/Depth Gauge prevents cutting deeper than absolutely necessary. This prevents possible weakening of the roof structure and prevents exposure to hidden hazards.

With the Guard/Depth Gauge the operator can focus attention on the cutting position, fire behavior and the surrounding environment for maximum safety.

Cutting Deeper than the Guard/Depth Gauge Setting

Increasing the saw angle to 90° (Fig 2) will result in a depth of cut increase up to .414" for every one inch graduation indicated on the cutting depth scale.

CE94CRS Concrete Sawing Kit

Our 23-piece CE94CRS Concrete Sawing Kit contains all of the tools you’ll need to cut concrete anywhere, using any available water source.

Concrete Saw Kit Includes:

  • (1) Diamond Plate Aluminum Case with Dividers and Tray
  • (1) CE94CRS 12”, 14” or 16” Concrete Cutting Chainsaw
  • (1) MP2531CE-1 Pump
  • (1) 1” x 10 ft. Suction Hose with 1” Female Camlock Fitting and 1” Check Valve (Foot Valve) attached
  • (1) 1” (npsh) Female x ¾” (ght)* Male Adapter/Thread Protector
  • (1) 1” (npsh) Female x 1” (nst) Male Adapter with Camlock Fitting attached
  • (1) ¾” x ¾” FHT Brass Hose to Hose Connector
  • (1) ¾” x 25 ft. 250 psi Myti-flo Woven Hose
  • (1) ¾” x 75 ft. 250 psi Myti-flo Woven Hose
  • (1) 2½” Female x ¾” (ght)* Male Adapter
  • (1) 1½” Female x ¾” (ght)* Male Adapter
  • (1) 1” Female x ¾” (ght)* Male Adapter
  • (1) Hydrant Wrench
  • (1) 1¼ Gallon Fuel Container (UL Approved)
  • (1) 3-Gallon Fuel Container (UL Approved) with 6 ft. Fuel Line, Primer Bulb and Quick-Connect Connectors, for up to 12 hours of Full-load Pump Operation
  • (1) 8 oz. Bottle – Cutters Edge 2-Cycle Oil Mix
  • (Will make 6 Gallons of Fuel)
  • (1) Spray Can of Lubricant/Water Displacer
  • (1) Tool Kit
  • (1) Safety Goggles
  • (1) Hearing Protectors
  • (1) 10” x 9” Collapsible Canvas Water Container for Pump Priming

*(ght = Garden Hose Thread)

Specifications subject to change without notice